Thanks to the Uniclic joint system, your floor simply clicks together. TORLYS floors are easy to install, easy to repair and easy to reuse! All you have to do is: Calculate, Cut and Click!

For detailed installation information click on the following floor: 

• Laminate (Provence, Uptown, Park Lane, Mainstreet)
• Hardwood (Summit, Twin Peaks, Everest)
• Cork (Planks and Tiles)
• Leather (Planks and Tiles)

Installation

• The only tools you will need: hammer, tape measure, saw (any type will cut the floor, from a table saw to a hand saw) and the TORLYS Installation Kit.
• The use of TORLYS 3-in-1 Total Foam Underlay is mandatory (except with TORLYS Uniclic Cork and Hardwood-Everest). 

• Tapping Block
• Wedges
• Last Board Puller

• Install end pieces cut on an angle.
• Replace planks in the center of a room, without cutting.
• Close open joint gaps.
• Fix sub-floor hollow spots.
• Easer access to underlay.
• Easily check perimeter expansion gaps.